FORT WORTH, TEXAS / TWO-WAY COMMUNICATIONS817-732-7791

Mobile two-way radio

Motorola MOTOTRBO CM300d

The CM300d lets drivers see channel names and other programmed information on the front display. Its 99-channel capacity fits fleets that work with several dispatch channels, routes, or facilities.

Display
Alphanumeric
Channels
99
Radio modes
Analog FM and DMR, depending on configuration
Model options
VHF or UHF
Motorola CM300d with alphanumeric display

Features & options

Named channels
Use short names that match what dispatchers and operators call each channel. The display can also show supported caller information.
Mixed fleet operation
Plan which compatible channels stay analog and which conventional DMR channels the vehicle will need.
Vehicle accessories
Choose mounting brackets, microphone, and an external speaker based on where the radio will go and how much noise there is in the cab.

Specifications

VHF models
136–174 MHz. Motorola lists 1–25 W and 25–45 W versions.
UHF models
403–470 MHz. Motorola lists 1–25 W and 25–40 W versions.
Radio chassis (H × W × D)
1.7 × 6.7 × 5.3 in
Weight
2.9 lb
Ingress protection
IP54

Common questions

What should the display show the driver?

Agree on channel names with dispatch before programming. If the system supports caller identification, test the names or IDs that operators will see for routine calls.

Can we keep a mix of CM200d and CM300d radios?

Both can share compatible analog or conventional DMR channels when configured for the same frequencies and signaling. A fleet can assign the larger channel plan to the CM300d and the core channels to CM200d-equipped vehicles.

How should we plan a replacement install?

Have the installer check the bracket and cable clearances, power wiring, microphone, and antenna against the exact power and band variant. Bring the old model and a photo of the mount when asking about reuse.

What to discuss for a quote

Share the channels and display names you need, vehicle types, and whether the radios will be installed in new vehicles or replace existing equipment.

Request a quote